Always wanted a fire pit by never knew how? Think it’s a lot of work? Well, it really isn’t. You’re four steps away from adding a new addition of warmth and awesome to your yard. Just check out these four easy steps from blogger A Beautiful Mess. Time to light it up!
1. OUTLINE YOUR FIRE PIT. Lay out the bottom ring of your stones in the grass where you want the fire pit to be. If you are going to use a metal ring, like we did, you can use that to build a few stones around to find your circle. Remove a few stones so you have space between them, and use the spray paint to mark where the outside of the stones would hit. Remove those remaining stones and complete your painted circle.
2. DIG YOUR FIRE PIT. Use a shovel, mattock, or whatever other digging tool you need to dig out your circle 6” deep. Depending on where you live, this will be an easier or more difficult task. Our Missouri grass has crazy strong roots and we have lots of giant rocks in the soil, so this was quite an arm workout for us!
3. FILL YOUR FIRE PIT. Once you have a 6” hole dug, you’ll want to pour your gravel into your hole until the gravel is level with the ground. The gravel will give your fire pit an important drainage area when it rains.
4. BUILD YOUR FIRE PIT. Place your first ring of stones around the edge of the gravel circle and use a rubber mallet to tamp the stones flat and even with each other. Again, if using a metal ring you can keep that in the middle to make sure you are fitting your stones right up against the ring. When placing the second row of stones, place some masonry adhesive on the bottom of each stone and stagger the placement of the second row (the middle of each stone should sit on the end seams of the row beneath it). Use the rubber mallet to even and tighten the stone placement. Repeat the process with the third row.